# 1225
Unused 5 Gallon Pfaudler T-316 ELC Stainless Steel jacketed Reactor
ASME Code stamped 60 PSI and Full Vacuum Internal@ 600 F.,
90 PSI @ 650 F. Jacket. With 2.5 DWV Pfaudler Drive and Lubricator, On Legs. Unused.
# 1135
USED APPROXIMATELY 50 GALLON PFAUDLER TYPE 316 STAINLESS STEEL REACTOR. RATED INTERNAL 55 PSI @ 700°F, JACKET 66 PSI @ 700°F. LIGHTNIN PNEUMATIC DRIVE 2 HP RATED. AGITATOR 3-BLADE PROPELLER AND 2-FINGER
BAFFLE.
# 1695
1- USED APPROX 80 GALLON STAINLESS STEEL JACKETED PRESSURE VESSEL. VERTICAL 30 IN DIA X 28 IN HIGH T/T, PLUS DISHED HEADS. STAINLESS STEEL DIMPLED JACKET. ASME CODE 20 PSI INTERNAL, 80 PSI JACKET @ 260 DEG F. 1- 18 IN TOP CENTER MANHOLE. 1- 1 1/4 ' CENTER BOTTOM OUTLET. ON STAINLESS STEEL
LEGS.
# 1694
1- USED 300 LITER ( APPROX 80 GALLON ) SANITARY STAINLESS STEEL MUELLER REACTOR. CLAMPED REMOVABLE DISHED TOP, DISHED BOTTOM WITH BOTTOM ENTERING IMPELLER MIXER ( REQUIRES DRIVE ). ASME CODE STAMPED 60 PSI/FULL VACUUM INTERNAL, 100 PSI JACKET @ 350 DEG F. INTERNALS HIGHLY POLISHED. USED IN A BIOTECH PROCESS.
# 1656
1- USED APPROX 1,000 GALLON T-316 ELC STAINLESS STEEL JACKETED REACTOR. 61 IN DIA X 65 IN HIGH T/T, PLUS DISHED HEADS. T-304 ELC STAINLESS DIMPLED JACKET. ASME CODE 182 PSI@ 350 DEG F JACKET, 182 PSI/FULL VAC INTERNAL @ 350 DEG F. TOP ENTERING AGITATOR WITH 2 TURBINE BLADES, BAFFLES. ALSO HAS AN INTERNAL U-TUBE BUNDLE HEAT EXCHANGER INSERTED IN TOP HEAD.
( photos # 1656 )
# 316-6
1- USED APPROX 1400 GALLON ( 5300 LITRES ) T-316 L STAINLESS STEEL
AGITATED PRESSURE/VACUUM TANK. INTERNALS HIGHLY POLISHED FINISH. 6 FT DIA X 6 FT HIGH T/T , PLUS DISHED HEADS. ASME CODE STAMPED 15 PSI/FULL VAC INTERNAL. WITH TOP ENTERING AGITATOR , DRIVE AND 7 1/2 HP MOTOR.
# 316-6
( PHOTOS # 316-6 )
# 1463
1- USED APPROX 2,400 GAL REACTOR, T- 316 ELC STAINLESS STEEL, WITH 50 H.P. AGITATOR AND DRIVE. 96 IN DIA X 48 IN HIGH STRAIGHT , HEMISPHERICAL BOTTOM HEAD 48 IN DEEP, DISHED TOP 18 IN DEEP. BUILT IN CANADA TO CRN CODE 50 PSI/FULL VAC INTERNAL, 200 PSI DIMPLED JACKET @ 400 DEG F. 1-8 IN OUTLET, 1-2 IN. TOP HAS 3- 4 IN SIGHT GLASS, 4- 3 IN,
2- 1 IN, 1- 4 IN, 2 - 12 IN, PLUS 16 IN DIA MANWAY WITH HINGED COVER, AGITATOR MOUNTING FLANGE. LUG SUPPORTS.2 SPEED MOTOR 50/25 HP , 1766/887 RPM , APPROX 47:1 RATIO FALK GEAR REDUCER ( APPROX 37 & 18 RPM FINAL OUTPUT SPEED ) SHAFT: 3 IN DIA X 60 IN LONG, WITH 48 IN IMPELLOR.
( Photos # 1463 )
